[Standard technical parameter]

Body type: single seat

Nominal diameter: DN20-DN300

Nominal pressure: ANSI150, 300, 600LB, JIS10, 16, 20, 30, 40K, PN1.6, 2.5, 4, 6.4MPa

Connection: flange: FF, RF, RJ and LG

Flange standard: ANSI, B16.5, JIS, B2201, JB/T79.1, PN1.6MPa, JB/T79.2

Thread: DIN, NPT, RC, BSP, G and so on

Welding: GB12224-89

Sealing surface form: PN16 convex, PN40, PN63, PN100 concave

Material: WCB, WCC, WC6, 304, 316, 304L, 316L

Upper valve cover: standard type (-20 ~ +200℃), low temperature type (-60~ -196℃), heat dissipation type (-40 ~ 450℃)

Bellows seal type

Gland type: press plate type

Packing: V PVC, PTFE flexible graphite fluoride

[Valve assembly]

Spool form: single seat plunger type, pressure balanced type, two seat, metal seal, soft seal, quick opening characteristics

Spool, valve seat: 304, 316, 316L+STL

[Actuating mechanism] 

Form: multi spring film actuator

Diaphragm material: NBR rubber clip to strengthen polyester fabric

Signal interface: internal thread M16×1.5

[Parameter]

Rating KV: refer to table

Flow characteristic: quick opening

Mode of action: pressure control before valve

After valve pressure control

Pressure adjustment range: refer to table

Pressure control accuracy: ± 8%

Leakage level: metal seal: less than 0.01 (ANSI, B16.104-1976IV)

Soft seal: less than 0.00001%

[Valve features]
       Automatic control valve is the use of the media's own energy to achieve automatic control valve, the pressure, temperature, flow, level adjustment, in the absence of electricity, gas free place, to simplify equipment, save energy.


[Adaptive condition]
       Used in petroleum, petrochemical, power, metallurgy, food, machinery, building construction. Automatic control of various gases, liquids, and vapors, reduced and regulated (for front or rear valves).